BerjayaTac

Now Open: Registration for Steam Boiler Engineer Grade 1 & 2 (Paper B & C) – November Intake [Click here]
  • Berdayatec Training And Consultancy Sdn Bhd
  • berdayatec@gmail.com
  • 016-250 6442

Trainers

DR. MOHD SHAFARUDIN BIN ABDUL RASOOL

Qualification:

 

  1. PhD in Engineering – Boiler Technology
  2. Sc. Business Engineering Management
  3. Degree in Mechanical Engineering
  4. 1st Grade Steam Engineer & I.C.E. Engineer (DOSH)
  5. Ex-Advisory member in Mechanical Trade for MLVK on Power Plant Syllabus and Course
  6. HRD CORP Accredited Trainer (42790) 2025

 

Working Experience:

  1. Asst. G. Manager at Penang Shipbuilding and Construction (2001 – 04)
  • In charge in ship building and maintenance of RMN and commercial vessels
  • In charge of ISO and quality matters in shipbuilding of vessels
  1. Senior Lecturer at Malaysia France Institute (1996 – 2001)
  • In charge in maintenance management for Automated System Maintenance Technology Department.
  • As a consultant to Matsushita Air Condition & Compressor.
  1. Engineering Manager at Guthrie Medicare Product (1995-1996)
  • In charge in maintenance of equipment and plants including Boiler Room, Cooling Towers, Fire Hydrant, Air Compressor, Pumping plant, Latex Dipping Plant, Chlorination Plant and Processing Plant.
  1. Factory Manager at FELDA Kernel Crushing Plant Pasir Gudang, Johor.(1990-1995)
  • In charge of operation and maintenance of Boilers, Steam Generators, Cooling Towers, Fire Hydrant, Air Compressor, Pumping Plant, Pre- treatment, Tank Farm, Pre-pressing plant, Generator sets, Piping System, Solvent Plant and Palletizing plant.
  1. Technical Assistant at Jabatan Kilang Dan Jentera (DOSH) Malaysia at HQ Damansara Kuala Lumpur (1988- 1990).

Courses Conducted

 

Organized and Conducted courses for various training organizations and individuals such as FNR Consultant, Fans Technology, KH Training, ATC Weld, Versatile Learning, JP Consultancy and Inforniche Training for the following courses:

Maintenance Management, RCM, TPM, TQM, Steam Boiler Operator & Engineer Grade 1 and 2, ICE Operator & Engineer Grade 1 & 2, Plant Improvement Courses for managers, engineers, supervisors from private and government sectors such as Ministry of Rural And Regional Development, All PETRONAS Subsidiaries, INSTEP, OPTIMAL, FELDA, RISDA, FELCRA, KUTKM, Matsushita Air Conditioning, Hume Fiber Board, MSE, Jabatan Tenaga Rakyat, Samsung Electronics, Hitachi Electronics, NUR, Teknik JanaKuasa,  Alstom Power, IOI, BORNEO SAMUDRA, SEBRANG P.O.M, TAMAKO P.O.M, Kapar Energy Ventures Sdn Bhd, Felda Sahabat Power Plant, Taiko Chemicals Sdn Bhd, See Sen Chemicals Sdn Bhd, PETRONAS Subsidiaries such as ABF, INSTEP, MLNG, SKO, SBO,  PSO and etc.

MR SP NARAYANNAN

Qualification:

 

  1. Degree in Mechanical Engineering
  2. 1st Grade Steam and Internal Combustion Engine Engineer ICE (DOSH)
  3. PSMB Certified Trainer

Working Experience:

 

Has 40 years of experience in operation & maintenance of Palm Oil Mills, Glove Manufacturing plant, Cable Manufacturing plant. Operation & maintenance of thermal boilers and chiller systems. He has undergone various training in United Kingdom, Germany, and Italy in controls & automation systems and cable manufacturing. He has conducted various public and in-house welding programs with SIRIM, FMM and RCFISET University Malaya for palm oil, rubber, cement, mining, shipyard and many other industries. Currently involved with Advance Manufacturing Centre SIRIM on failure analysis and wear problems in palm oil and other industries. His R&D project is on “How to save Millions by Reducing Spare Part Inventory “. Conducted approximately 60 public programmes on Reclamation Welding Technology for Palm Oil Industries- (Certificate Course), Repair and Maintenance Welding Technology for General Industries. Welders Certification – SMAW (ASME section IX – 3G / 6G)

 

  • IMM – SIRIM Technical Working Group Committee Member for the ASIAN Welding Standardization Forum ‘ASWF’
  • Committee Member for National Occupational Skill Standard (NOSS) – WELDING Lemb. Pemb. Ind. Pembinaan Malaysia Construction Industry Development Board Malaysia – CIDB Malaysia                                                                                                                                                                       

 

Presented technical papers:

 

  • Maintenance and Reclamation welding in Palm Oil Industries: By Dr Samsudin Bani Sirim & SP Narayannan – ATC IIW Welding Conference 2004 -Cairo.
  • Reclamation Welding Technology in Maintenance of Plant.
    By SP. Narayannan & Dr Samsudin Bani. SIRIM IMM- SIRIM- Asian Welding Federation International Welding Seminar. 2005.
  • Welding Technology for Best Milling Practice
  • Welding Technology in Palm Oil Industry MPOB National Conference 2006 – Kuching

EDWARD BIN HENRY SINANGGUL

Qualification:

 

  1. Degree in Mechanical Engineering
  2. 1st Grade Steam and Internal Combustion Engine Engineer ICE (DOSH)
  3. PSMB Certified Trainer

 

Working Experience:

 

  1. Mechanical Engineer and Shift in Change at Sabah Electricity Sdn Bhd – Combined Cycle Power Plant (1997 – 2024)
  • Prepare report generation on daily operation.
  • Execute Gas Turbine/Steam Turbine Performance Test.
  • Water treatment and analysis – Boiler.
  • Customer Satisfaction Index (CSI).
  • Reduce Generator Tripping. (Open /Combined Cycle)
  • Optimize Operations Productivity. (Combined Cycle)
  • Improve OPEX Utilization.
  • Reduce Generation Cost (CPU). (Open Cycle)
  • Improve Organization Competency level.
  • To improve staff competency.
  • Improve safety culture.
  • Improve/maintain Generation Availability (AF).
  • ISO 9001:2008 Compliance.
  • ISO14001:2004 Compliance.

 

  1. Technical Assistant at Lembaga Letrik Sabah/Sabah Electricity Sdn Bhd – Diesel Power Plants (1992 – 1997)
  • Maintenance Inspection for every generator set (every 24,000 hrs of running hours)
  • Pre-Maintenance Inspection for every generator set (every 12,000 hrs of running hours)
  • Assisting the Shift Manager to prepare the working schedule of daily, weekly, and monthly routine for operation unit and maintenance unit.
  • Prepared maintenance reports, faulty, availability and analysis.
  • Prepared tender analysis for spare part.